Woodworking Project #2 – Deadpool Heart-shaped Box

Back in February I saw a few woodworkers like +Jimmy DiResta and +Steve Ramsey making heart-shaped boxes and I figured it would be small enough for me to give it a try.

I started by cutting 12 squares of 3mm plywood roughly 10cm x 10xm. I glued 2 of them together for the bottom part, tacked 2 of them together for the lid and glued the remaining 8 for the centre part. Then when all was dried I tacked all 3 sections together and cut out the outer heart shape on the scroll saw (again no band saw here). Cutting a nearly 4cm thick stack of wood was a rather slow job. I'm pretty sure my scroll saw is meant for far thinner pieces but I managed it.

When the shaped was cut out I hollowed out the heart at the centre from the stack of 8 to get the outer wall of the box. This also was a slow process.

At this point I didn't quite know what pattern to put on the lid but soon after seeing Deadpool, I thought this would make an awesome design for something like this. I made this as a present for +Stephanie Rebours-Smith (and ended up being late giving it on Valentine's day but that wasn't a big deal) so I thought she'd find the idea amusing if nothing else.

Since the lid was not glued together I took the top part and marked the design to hollow out on the scroll saw. This time it was much faster to cut but also required more precision as this was cutting the main design.If you look carefully the design isn't completely symmetrical but it's good enough for me to be happy with it. Once the design was cut I glued it to the last whole heart cut from the complete stack. The I went back to the piece hollowed out from the centre and cut out a 5mm or so piece to act as a lid blocker. The heart shape from this wasn't perfect but since it got all painted in black I wasn't fussed about it being perfect.

The middle section and the bottom were glued together and the edges sanded off for a smoother finish. Then I finished it by priming the whole box with white paint then coming back to it with acrylic paint to have it red on the outside and black on the inside with the eye-slits being white. I completed it with a few layers of protective sealant.

Overall this was a great improvement from the first project and I was really happy with the end result. Sure it's not made from expensive hard woods but considering it's all painted over anyway, I think it works really well. Hopefully you guys like it too :)

Google+: View post on Google+

Post imported by Google+Blog. Created By Daniel Treadwell.

1 thought on “Woodworking Project #2 – Deadpool Heart-shaped Box”

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top